Skip to main navigation Skip to main content
The University of Southampton
Engineering

Research project: Experimental and analytical techniques for the assessment of in vitro implant migration in polymer foam models

Currently Active:
Yes

Early migration of implants has been hypothesised by many as a predictor for failure by aseptic loosening. This project combined experimental and numerical methods in an attempt to develop pre-clinical tools for understanding and assessing implant migration, using a polymer foam material as an analogue for cancellous bone.

Fatigue testing was used to assess the suitability of this material substitute. Finite element methods with continuum damage models were used to quantify the fatigue/migration simulation. It was shown that in many cases an analysis of the numerical stress and strain fields could be used to predict the ‘life’ of the implant-substrate complex under uniaxial loading.

Damage contour levels
Testing

Related research groups

Bioengineering Science
Share Share this on Facebook Share this on Twitter Share this on Weibo
Privacy Settings
Powered by Fruition