We are located on Level 1 in Eustice Building (B5) on Highfield Campus
Main entrance is located at the rear of Eustice Building (B5). There is also a direct access to the facility through the main entrance of the Building (follow signs to μ-VIS X-Ray Imaging Centre).
μ-VIS X-Ray Imaging Centre
Eustice Building (B5)
Faculty of Engineering and Physical Sciences
Highfield Campus
University of Southampton
SO17 1BJ, United Kingdom
Exit the M3 at junction 14 on to the A33 (Bassett Avenue; second exit at the roundabout). Go through one more roundabout and turn left at the traffic lights on to Burgess Road. At the third set of traffic lights turn right on to University Road. Take the first turning on the left and drive down the hill past the entrance to the pay and display car park on to a red brick road, which sweeps round to the right.
Please park along this red brick road in between the Tony Davies High Voltage laboratory and the R.J. Mitchell Wind Tunnel (cf. GoogleMaps and Annotated Maps below). Once parked, continue walking down to the end of the red brick road, bearing right at the Y, then turn left, the lab is behind a blue double door in a red brick building.
See also the Annotated Map and GoogleMaps
Biomedical Imaging Unit - X-ray Histology facility,
Mailpoint 12,
Laboratory and Pathology Block,
University Hospital Southampton,
Tremona Road, Southampton,
SO16 6YD.
The XRH facility is locate in the University Hospital Southampton. We operate two scanning laboratories on Levels A and B of the Laboratory and Pathology / South Academic Block. Visitors are kindly requested to check in the Biomedican Imaging Unit ( BIU ). If you've never been there here is how to find it:
BIU is on Level B in the South Academic Block. The easiest way to reach us is to give us a call when you reached the main entrance lobby and we will come and collect you. If you wish to brave it:
For more details please also see BIU page here:
https://southampton.likn.co/biu/about/location.page
and the map below.
If you have been specifically asked to meet with us in our scanning room on Level A (room LA62); e.g. to drop-off or collecting samples or equipment, you can access the lab from the services' entry by the Minerva House outbuilding. See Google Pin and What3Words links below