Defintions applying to Part I only of undergraduate programmes at the Joint Education Institute

Academic Regulations: Faculty of Engineering and Physical Sciences

SchoolEngineering
Final AwardBachelor of Engineering
Programme(s)
  • BEng Naval Architecture
  • BEng Marine Engineering
  • BEng Underwater Acoustics
  • BEng Control Engineering

The above programmes are delivered at the Southampton Ocean Engineering Joint Institute at Harbin Engineering University.

Last modifiedJuly 2024

The Academic Regulations apply to and regulate the programme(s) listed above.

On occasion, programmes can be exempted from one or more of the clauses in the Regulations; one or more of the clauses can be varied; and programmes can impose additional requirements.

  • Exemptions are characterised by the omission of the relevant clause.
  • Variations are characterised by the replacement of the clause with alternative wording.
  • Additions are characterised by requirements in addition to those detailed in the Academic regulations.

The programmes listed have approval from the Academic Quality and Standards Subcommittee for the exemptions and/or variations and/or additions to the regulations noted below.

These definitions should be read in conjunction with the relevant Programme Specification and the General Academic Regulations for Taught Students. Numbering of paragraphs in this section corresponds to the paragraph numbers in the Regulations and Definitions Applying to Progression for all Credit-Bearing Programmes

Where a paragraph is marked Exemption or Not Applicable, the corresponding paragraph in the Regulations and Definitions Applying to Progression for all Credit-Bearing Programmes does not apply to Part I students on Engineering programmes in the School of Engineering. 

Where a paragraph is marked Variation, the text here supersedes the corresponding paragraph in the Regulations and Definitions Applying to Progression for all Credit-Bearing Programmes for Part I students on Engineering programmes in the School of Engineering. 

Where a paragraph is marked Applies unchanged, the corresponding paragraph in the Regulations and Definitions Applying to Progression for all Credit-Bearing Programmes applies to Part I students on Engineering programmes in the School of Engineering.   

Where a paragraph is marked Addition, it indicates an extra requirement which applies to Part I students on Engineering programmes in the School of Engineering to that given in the Regulations and Definitions Applying to Progression for all Credit-Bearing Programmes.  

1.Introduction
1.1The following regulations apply to all programmes at levels 6 and 7 (see Credit Accumulation and Transfer Scheme). They should be read in conjunction with the Progression, Determination and Classification of Results: Undergraduate and Integrated Masters Programmes or the Progression, Determination and Classification of Results: Postgraduate Masters Programmes as applicable to the programme of study.Applies unchanged
2.Definitions
2.1Average Mark contribution to a Part of a Programme: The Average Mark is the mark obtained by taking the average of all individual Module marks, weighted according to their respective credit point weightings, that contribute to the assessment of a single Part of a programme. The Average Mark is recorded truncated to 1 decimal place in the assessment grid.Exemption
2.2Capped Mark: The Capped Mark will be less than or equal to the Module Pass Mark. When a mark is "Capped" the mark used to calculate the Average Mark carried forward to determine the final degree classification is: the Module Pass Mark, when the actual mark achieved for the Module is equal or greater than the Module Pass Mark and is the actual mark if the actual mark achieved is lower than the Module Pass Mark. The circumstances in which Capped Marks are used are set out in paragraphs 4, 5 and 6 of the Progression, Determination and Classification of Results: Undergraduate and Integrated Masters Programmes or paragraphs 3.1 and 3.2 of the Progression, Determination and Classification of Results: Postgraduate Masters Programmes.Not applicable
2.3Compensation: Pass by Compensation is the award of credit for a Failed Module on the basis that performance elsewhere in the Part is sufficient to ensure the learning outcomes of the programme tested in that Part have been met, or will be met following successful Referral. The detailed rules for allowing compensation are given in University progression regulations and programme regulations.Not applicable
2.4Compulsory Module: A Compulsory Module is a Module which must be taken by all students on a particular programme. Compulsory Modules may be Passed by Compensation.Not applicable
2.5Core Module: A Core Module is a module which must be taken and Passed. Core Modules may not be Passed by Compensation. Where programme regulations specify, a student may be required to select a Module from within a group of Modules, which, once selected, becomes Core.Not applicable
2.6Fail: A Fail may apply to a Module, a Part or a programme. A Failed Module is one in which no credit is awarded. A Failed Part is one in which either insufficient credit is awarded or any required Average Mark for the Part is not achieved. A Failed programme is one in which insufficient credit is awarded or the minimum required Final Average Mark is not attained.

Variation:

Fail: A Fail applies to a Required Assessment or to the Part. A Required Assessment is Failed if its Pass Mark is not achieved. The Part is failed if one or more Required Assessments are Failed. No credit is awarded for a Failed Part.

2.7Final Average Mark: The Final Average Mark is the mark obtained by taking the average of all individual Module marks, weighted according to their respective credit point weightings and Part weightings and is used for degree classification purposes. The Final Average Mark is recorded truncated to 1 decimal place in the assessment grid.Exemption
2.8Module: A Module is a specified element of learning material with its own learning outcomes, assessment procedures and credit point rating. A module must be assigned credit points at one level only. (The terms 'Unit' and, in the context of the Student Records System, 'Course' are synonymous with 'Module'.)

Variation:

Module: A Module is a specified element of learning material with its own learning outcomes, and credit point rating. A Module must be assigned credit points at one level only. (The terms 'Unit' and, in the context of the Student Records System, 'Course' are synonymous with 'Module'.)

2.9Module Mark: The Module Mark is the weighted sum of all the components of summative assessment for a given module. The average is rounded to the nearest integer for insertion into the assessment grid. The Module Mark is based on the 100-point Mark Scheme.Exemption
2.10Non-Compensatable Fail: A Non-Compensatable Fail is a Failed Module which cannot be Passed by Compensation. A Failed Module is Non-Compensatable if the mark achieved for the Module is lower than the Qualifying Mark, or if the Failed Module is a Core Module for the programme.Not applicable
2.11Option Module: An Option Module is a Module selected from a group of available Modules which does not become Core or Compulsory on selection. Option Modules may be Passed by Compensation.Not applicable
2.12Part: A Part is a collection of Modules which is assessed as a group to determine Progression. (The term 'Part' is preferred to 'Year' which can be imprecise in the context of part-time students or students who Repeat or suspend registration, and also preferred to 'Level' since not all material will necessarily be at the same academic level.) For full time undergraduate students a Part normally corresponds to two semesters of study.  A Part will predominantly be at one academic level with successive Parts at successively higher levels. However, some study within a Part may be at other levels as permitted by the Credit Accumulation and Transfer (CAT) Scheme. The total credit rating for the Modules in a Part will be as specified in the CAT Scheme.Applies unchanged
2.13Pass: A Pass may be achieved in a Module and Part or a programme. For a Module, a Pass is the award of Credit for that module and may result from attaining at least the Module Pass Mark in the assessment or through Compensation. For a Part, a Pass is achieved through attaining sufficient credit and any required Average Mark. For a programme, a Pass is achieved by attaining sufficient credit and at least the minimum required Final Average Mark.

Variation:

Pass: A Pass applies to a Required Assessment or to the Part. A Pass in a Required Assessment is achieved through achieving its Pass Mark. A Pass in the Part is achieved by Passing every Required Assessment. Full credit is awarded for a Pass in the Part.

2.14Pass Mark: The Pass Mark is the minimum mark that must be achieved in order to pass. It may be applied to a Module to an Average Mark or to a Final Average Mark. Information about the relevant Pass Marks may be found in the Regulations for Progression, Determination and Classification of Results: Undergraduate and Integrated Masters Programmes and the Regulations for Progression, Determination and Classification of Results: Postgraduate Masters Programmes.

Variation:

Pass Mark: The Pass Mark is the minimum mark that must be achieved in order to Pass a Required Assessment as documented in the Part I Assessment Schedule.

 

2.15Professional, Statutory and Regulatory Bodies (PSRBs): External bodies which accredit programmes that lead to a professional or vocational qualification or exemption from a professional examination.Applies unchanged
2.16Progression: A student who Passes a Part of a programme Progresses to the next Part, or in the case of the final Part of their programme, progresses to Classification of their degree.Applies unchanged
2.17Qualifying Mark: The Qualifying Mark is the minimum mark that must be achieved in a Module in order for a Pass by Compensation to be awarded (subject to paragraph 3.3 for the Progression, Determination and Classification of Results: Undergraduate and Integrated Masters Programmes or paragraph 3.2 for the Progression, Determination and Classification of Results: Postgraduate Masters Programmes).Not applicable
2.18Referral: Referral is the re-taking of all or part of the assessment or an alternative assessment for a Failed Module in order to achieve the Pass Mark. Referral assessments are usually taken in August/September at the end of the academic year in which the Module was Failed, but may be taken at other times, including earlier, as specified by the School in which the Module is taught. The arrangements for Referral are specified in paragraphs 4 and 6.1 of the Regulations for Progression, Determination and Classification of Results: Undergraduate and Integrated Masters Programmes and paragraphs 4.1 to 4.6 of the Regulations for Progression, Determination and Classification of Results: Postgraduate Masters Programmes.

Variation:

Referral: Referral is the re-taking, due to a Fail, of one or more Required Assessments in the original or a revised format in order to achieve the Pass Mark. Referral assessments are usually taken in August/September at the end of the academic year in which the Required Assessment was Failed, but may be taken at other times, including earlier, as specified by the Faculty setting the Required Assessment.

2.19Repeat: Repeat is the re-taking of assessments during the academic year following the first attempt, or following an unsuccessful Referral. Normally students may choose whether to Repeat Internally or Externally, following academic counselling from the School in which they are registered. However, some Modules have specific practical or placement requirements that necessitate attendance; students needing to Repeat such Modules will be required to undertake a full Internal Repeat. Where this applies it will be stated in the Module Profile. Should a Module which is to be Repeated not be available in the following year, the Board of Examiners will specify what alternative assessment should be taken. The Arrangements for Repeat are specified in sections 5 and 6.2 of the Regulations for Progression, Determination and Classification of Results: Undergraduate and Integrated Masters Programmes and paragraphs 5.1 to 5.6. of the Regulations for Progression, Determination and Classification of Results: Postgraduate Masters Programmes.

Variation:

Repeat: Repeat is the re-taking of assessments during the academic year following the first attempt, or following an unsuccessful Referral. Normally students may choose whether to Repeat Internally or Externally, following academic counselling from the Faculty in which they are enrolled. However, some Required Assessments have specific practical or placement requirements that necessitate attendance; students needing to Repeat such Required Assessments will be required to undertake a full Internal Repeat. Where this applies it will be stated in the Part I Assessment Schedule. Should an assessment which is to be Repeated not be available in the following year, the Board of Examiners will specify what alternative assessment should be taken.

2.20Internal Repeat: A student choosing an Internal Repeat will be required to Repeat all Modules, including those passed at the first attempt. The student is entitled to attend all taught sessions, and required to submit all coursework and to take all examinations. The full tuition fee is charged for an Internal Repeat. A student choosing an Internal Repeat is not permitted to transfer to an External Repeat part way through the year.

Variation:

Internal Repeat: A student choosing an Internal Repeat will be required to Retake all Required Modules constituting the Part I programme and to Repeat all Required Assessments including those Passed at the first attempt. The student is entitled to attend all taught sessions, expected to submit all formative work and to take all Required Assessments. The full tuition fee is charged for an Internal Repeat. A student choosing an Internal Repeat is not permitted to transfer to an External Repeat part way through the year.

2.21

External Repeat: A student choosing an External Repeat will be permitted to Repeat only those Modules which were Failed at the first attempt and not passed at Referral. The student is not required to pay tuition fees and hence is not entitled to access taught sessions or academic or pastoral support services. He/she will have an enrolment status of 'Repeat non attending' which allows access to the Library and to IT services only, A student Repeating Externally may be required to pay fees for examinations and other assessments. Programme Regulations will specify the mode of assessment which will be used. A student choosing an External Repeat is not permitted to transfer to an Internal Repeat part way through the year.

 

Variation:

External Repeat: A student choosing an External Repeat will be permitted to Repeat only those Required Assessments which were Failed at the first attempt and not Passed at Referral. The student is not required to pay tuition fees and hence is not entitled to access taught sessions or academic or pastoral support services. He/she will have an enrolment status of 'Repeat non attending' which allows access to the Library and to IT services only. A student Repeating Externally may be required to pay fees for examinations and other assessments. Programme regulations will specify the mode of assessment which will be used. A student choosing an External Repeat is not permitted to transfer to an Internal Repeat part way through the year.

 

2.22Year In Employment: The Year in Employment module is an assessed placement opportunity that can be integrated with any eligible three or four year degree programme. A student who wishes to take this opportunity must transfer to a programme with Year in Employment in the title.Not applicable
AdditionPart I Assessment Schedule: The schedule of Required Assessments for students in Part I and the associated Pass Marks for these assessments. The Schedule is located in the Appendix to the Programme Specification and divided into two subsections: Schedules A & B
AdditionRequired Assessment: A Required Assessment is a compulsory assessment for the Part which must be Passed in order for a student to Progress to Part II. The Required Assessments are as specified in the FEE Part I Assessment Schedule located in the Appendix to the Programme Specification.
AdditionRequired Module: A Required Module is a module for which enrolment is compulsory. The Required Modules for a Part are as specified in the Programme Specification.
3.Implications for Students Sponsored by the University
3.1The University is licensed by the UK Visas and Immigration (UKVI) to act as a Student sponsor to Eligible Students admitted to Relevant Programmes of Study at the University. As a licensed Sponsor, the University must comply with certain specified obligations to the UKVI. A student sponsored by the University to enter the UK who is unable by the terms of their Student Visa to remain in the UK to undertake an Internal Repeat will retain the right to an External Repeat provided this is permitted by the regulations applicable to their programme of study. Where an External Repeat is not permitted the student's programme will of necessity be terminated. Regulation 4.3 of the Regulations Governing Students Sponsored by the University under the Student visa route of the Points Based System will apply. On successful completion of an External Repeat, the student will need to reapply for entry into the UK.Applies unchanged
3.2The UKVI places limits on the total period of time a student on a Student Visa can spend studying at or above degree level in his/her lifetime; time spent undertaking an Internal Repeat will count towards this total period.Applies unchanged
3.3A student who is concerned about his/her entitlement to remain in the UK following a failure to progress should seek urgent advice from the Visa and Immigration Student Advice ServiceApplies unchanged
3.4A student who wishes to transfer to another programme of study or to a different level of study in the same discipline (eg: Integrated Masters to Bachelors) should seek urgent advice from the Visa and Immigration Student Advice Service (VISAS Team, Registry). The UKVI has strict regulations governing programme transfers and these are only allowed under certain circumstances.Applies unchanged

These regulations should be read in conjunction with the programme specification.

Disclaimer

As a research-led University, we undertake a continuous review of our programmes to ensure quality enhancement and to manage our resources. As a result, these regulations may be revised during a student’s period of registration, however, any revision will be balanced against the requirement that the student should receive the educational service expected. Please read our Disclaimer to see why, when and how changes may be made to a student’s programme.