Research project

A capability for patterning beyond-CMOS devices at atomic scale

Project overview

The twentieth century has witnessed an exceptional technological progress in consumer electronics that has utterly shaped modern societies and economies. This ICT evolution was mainly driven by the invention of the transistor and integrated circuits, with chemistry and materials science playing a pivotal role in manufacturing active devices with distinct and reliable properties that over the past 70 years have been following Moore's scaling trend. The need for continuing advancing the performance of devices and systems is thus driving research efforts in prototyping and demonstrating novel nano-scale concepts at extreme dimensions - towards the single nanometre scale. This is not only important both for commercially available CMOS technologies as well as "beyond-CMOS" technologies that promise to disrupt the current electronics landscape by delivering unprecedented computational at extreme low-power. At the same time, emerging techniques for deep-subwavelength optical imaging based upon AI-enabled analysis of diffracted/scattered light fields are also constrained by current nanoscale precision and accuracy with which training samples can be fabricated.

Electron Beam Lithography has so far supported such developments in the deep-submicron regime by directly patterning resists with a focused beam of electrons. A high acceleration voltage can facilitate the writing of fine and more vertical (better defined) lines, minimise proximity issues, achieve a better pattern fidelity and allow for a wider dose optimisation window. Existing electron beam lithography (EBL) systems in the UK operate at voltages up to 100 kV and can in principle reach writing resolutions down to 5nm. This programme aims at procuring the world's highest acceleration voltage EBL system that can be flexible operated from 25 kV to 150 kV for writing efficiently and fast a wide range of feature sizes (sub-5nm) across large areas, sample substrates (up to 8") and resist thicknesses. This new capability will provide a unique platform (first one in the UK and Europe) for innovation via manufacturing a wide-range of beyond-CMOS devices and nanostructures at unprecedented scales. The knowledge gained with this new instrument will not only contribute to an in-depth understanding of nanodevice physics but also advance developments in disruptive ICT concepts across emerging memory, computing, plasmonics, photonics and sensory architectures. Hosting this unique capability within Southampton's nanofabrication suite brings unique opportunities for usage along other state-of-art tools, including an EPSRC funded DUV Stepper/Scanner, that will support industry compatible wafer scale processing that allows mimicking the manufacturing capability of EUV tools (costing in excess of 100M£) and are used for production at industrial foundries for advanced technological nodes (3, 5 and 7 nm). Finally, the tool will support a diverse, inclusive and collaborative research community, fostering interactions between academia and industry, and enabling innovative research projects and directions.

Staff

Other researchers

Professor Sir David Payne KBE CBE FRS FREng

Professor of Photonics

Research interests

  • high-power fibre lasers
  • spun fibres for control of dispersion, now extensively used in undersea fibre cables
  • the Er/Yb cladding-pumped fibre amplifier used for cable television distribution
Connect with Sir David

Professor Nikolay Zheludev

Professor of Physics & Astronomy
Connect with Nikolay

Dr Dimitra Georgiadou PhD FHEA MRSC

Associate Professor

Research interests

  • green manufacturing of flexible nanoelectronic devices
  • photonic synapses for neuromorphic computing
  • solution-processed non-toxic materials
Connect with Dimitra

Collaborating research institutes, centres and groups

Research outputs