Research project

T Blumensath - Blueprint constrained x-ray tomography reconstruction

Project overview

X-ray imaging technology is increasingly used for specialised non-destructive testing and measurement applications, especially in high value and safety/performance critical industries, such as defence or aerospace. Current tomographic methods, which can image detailed internal geometries, require x-ray images to be taken from angles evenly spaced around the object under investigation. However, problems arise because 1) x-ray penetration depth is limited and 2) different materials absorb x-rays in varying amounts. Thus, large objects such as larger panels or assemblies with materials with widely varying x-ray absorption profiles can thus often not be imaged with these techniques, even if x-ray penetration is possible in some directions and through some materials.

The inspection of many composite components encountered in aerospace structures is not currently feasible with traditional x-ray imaging techniques, either due to their high aspect ratio or due to the presence of highly absorbing metal structures. Yet owing to their safety critical function, such components often need to be inspected regularly for internal defects using non-destructive testing methods. Current non-destructive inspection approaches, however, are often not applicable. For example, ultrasound testing can often not be applied to many advanced composite materials whilst thermography has limited depth capability. For such composite materials, x-ray based techniques remain one of the few alternatives if these materials are to be used to their full potential in future aerospace design.

Building on a current project in which we are developing x-ray imaging hardware that allows us to scan flat panel carbon fibre structures with unconventional scan trajectories, the current proposal aims at the development of new computational methods to recover the three dimensional x-ray absorption profile from the x-ray measurements made with our new system. Current experiments using traditional methods have shown that available x-ray tomography reconstruction algorithms perform poorly in scan settings where a component cannot be scanned from all directions. This is due to a fundamental physical limitation of the system, which is just not able to acquire enough information to allow good reconstructions. This fundamental limit can only be overcome if we can introduce additional information into the reconstruction.

For nearly all modern manufactured components, such information is luckily available in the form of detailed CAD drawings and it is this information we propose to use to overcome the x-ray tomographic reconstruction problem.

In particular, we will address the following problems.

1) Design a reconstruction algorithm that uses CAD drawings as prior information in order to directly estimate object boundaries.

2) Allow the estimated surface to be close to, but not necessarily identical to the surfaces predicted by the CAD model.

3) Only once object boundaries have been estimated, use a second reconstruction step to estimate the spatial distribution of x-ray absorption.

4) Use a multigrid approach to increase computational efficiency of the method

To design lighter, cheaper and more efficient airplanes, many components need to become lighter and cheaper whilst still satisfying strict performance standards. This can often be achieved using modern composite materials. As the use of these components is safety critical, reliable inspection methods are required if these components are to be used.

Staff

Lead researchers

Professor Thomas Blumensath

Professor

Research interests

  • I develop and study advanced algorithms that can solve challenging inverse problems by efficiently exploiting complex prior information. Using techniques from mathematics, statistics and machine learning, my work concentrates primarily on problems in x-ray tomographic image reconstruction and modelling.
  • I work closely with state-of-the-art imaging facilities (µ-VIS, the National Research Facility in Lab-based XCT, the UK’s synchrotron facility at the Diamond Light Source, and ISIS neutron imaging beamline) to find practical solutions to a range of important scientific problems from plant science to manufacturing.
  • My research interests cover areas such as: Theoretical and computational methods for Signal and Image Processing (Machine Learning, Compressed Sensing, Statistical Signal and Image Processing, Quantum Computing, Inverse Problems, Optimisation, X-ray Tomographic Imaging); Advanced tomographic imaging strategies: (limited angle tomography and laminography, Spectral X-ray imaging, Stereo and extreme limited view tomography); Efficient computational methods for tomographic reconstruction, including GPU acceleration, distributed computation and advanced optimisation strategies, Constrained optimisation for ill-conditioned and underdetermined   tomographic inverse problems, Applications of X-ray tomography to the inspection of manufactured components, Multimodal tomographic imaging
Connect with Thomas
Other researchers

Dr Richard Boardman PhD, MInstP

Principal Enterprise Fellow
Connect with Richard

Collaborating research institutes, centres and groups

Research outputs

Harry Rossides, Hossein Towsyfyan, Ander Biguri, Hans P Deyhle, Reuben J Lindroos, Mark Mavrogordato, Richard Boardman, Wenjuan Sun & Thomas Blumensath, 2022, Metrologia, 59(044003)
Type: article
Ander Biguri, Reuben J. Lindroos, Robert Bryll, Hossein Towsyfyan, Hans Deyhle, Ibrahim Harrane, Richard Boardman, Mark Mavrogordato, Manjit Dosanjh, Steven Hancock & Thomas Blumensath, 2020, Journal of Parallel and Distributed Computing, 146, 52-63
Type: article
Hans Deyhle, Hossein Towsyfyan, Ander Biguri, Mark Mavrogordato, Richard Boardman & Thomas Blumensath, 2020, NDT & E International, 111
Type: article
Hossein Towsyfyan, Ander Biguri, Richard Boardman & Thomas Blumensath, 2020, Chinese Journal of Aeronautics, 33(3), 771-791
Type: article