Module overview
This module gives a comprehensive coverage of the classical heat transfer syllables, including steady and transient heat conduction, convection and radiation. While the underlying mathematics are properly elaborated, their conceptual significance and physical interpretations are emphasised and enforced through in-class examples. Numerical methods are introduced for problems in 2-3 dimensions and the use of commercial software such as AnsysTM is introduced. In addition to the traditional analysis of heat exchangers, the application section is expanded to introduce heat transfer engineering at different heat flux and/or temperature differences, with emphasis on energy systems and the thermal management of electronic components/devices.
Aims and Objectives
Learning Outcomes
Transferable and Generic Skills
Having successfully completed this module you will be able to:
- Work as heat transfer and thermal analysis specialist as part of design teams [Contributes to AHEP learning outcomes Sm3, Sm8M, EA1m, EA2, EA3m, EA4m, EA5m, EA6m, P, G4]
- Application to the heat transfer conceptual design and analysis for system integration into an engineering equipment [Contributes to AHEP learning outcomes Sm3, Sm8M, EA1m, EA2, EA3m, EA4m, EA5m, EA6m, P1].
- Apply the underlying mathematical analysis used in heat transfer to other engineering problems [Contributes to AHEP learning outcomes Sm3, SM8M, EA1m, EA2, EA3m, EA4m, EA5m, EA6m, P1].
Knowledge and Understanding
Having successfully completed this module, you will be able to demonstrate knowledge and understanding of:
- The mechanisms for different heat transfer modes and their relevance to a wide range of mechanical engineering themes [Contributes to AHEP learning outcomes Sm1, Sm2, Sm3, Sm5m, Sm8M].
- The roles of heat transfer analysis in system design [Contributes to AHEP learning outcomes Sm3, Sm8M, EA1m, EA2, EA3m, EA4m, EA5m, EA6m, P1].
- The mathematical underpinning of heat transfer analysis and corresponding problem solving techniques [Contributes to AHEP learning outcomes Sm1, Sm2, Sm3, Sm5, Sm8M].
- The relevant thermal properties of materials and working fluids and the considerations for material selection according application requirements Contributes to AHEP learning outcomes Sm1, Sm2, Sm3, Sm5m, Sm8M].
- The engineering practices for enhancing heat transfer or increasing thermal insulation [Contributes to AHEP learning outcomes Sm1, Sm3].
- The use commercial software for heat transfer analysis [Contributes to AHEP learning outcomes Sm1, Sm2, Sm3, Sm5m, Sm8M, P3].
Subject Specific Intellectual and Research Skills
Having successfully completed this module you will be able to:
- Be able to independently assess the relevance and impact of heat transfer process in a given engineering application/context [Contributes to AHEP learning outcomes Sm3, Sm8M, EA1m, EA2, EA3m, EA4m, EA5m, EA6m, P1].
- Be able to appreciate and discuss with specialists the best heat transfer solutions [Contribute to AHEP learning outcomes EA1m, EA2, EA3m, EA4m, EA5m, EA6m]
- Identify and advise the dominant heat transfer mode and qualitative estimation of its importance [Contributes to AHEP learning outcomes Sm3, Sm8M].
- Be able to perform heat transfer analysis as a part of system design [Contributes to AHEP learning outcomes Sm3, Sm8M, EA1m, EA2, EA3m, EA4m, EA5m, EA6m].
Subject Specific Practical Skills
Having successfully completed this module you will be able to:
- Abstract and formulate the heat transfer analysis for a given engineering problem by applying the appropriate equations and/or correlations [Contributes to AHEP learning outcomes Sm3, Sm8M, EA1m, EA2, EA3m, EA4m, EA5m, EA6m].
- Outline engineering design for heat transfer applications [Contributes to AHEP learning outcomes Sm3, EA1m, EA2, EA3m, EA4m, EA5m, EA6m, P1].
- Evaluate and critically assess the heat transfer analysis presented [Contributes to AHEP learning Sm8M, EA1m, EA2, EA3m, EA4m, EA5m, EA6m, P1].
- Use the appropriate method (conceptual, analytical and numerical) to obtain the solution for a given heat transfer problem [Contributes to AHEP learning outcomes Sm3, Sm5m, Sm8M, EA1m, EA2, EA3m, EA4m, EA5m, EA6m]
Syllabus
This module consists of two organically integrated components: (a) a comprehensive and rigorous treatise of heat conduction, convection and radiation, the three basic modes of heat transfers; and (b) modern engineering applications of heat transfer.
Part I: Fundamentals
1.1 Introduction:
1.2 Heat conduction:
a. Simple 1d steady state: from Fourier’s law to differential equation, infinite slab and other 1d geometries (thin wire/rod, cylinder and sphere), boundary conditions and boundary value problems, nonlinear conduction and composite materials, equivalent circuits, thermal resistances including convection boundary condition, critical radius of cooling/heating;
b. Heat diffusion equation and applications: derivation, introduction to 3d and transient conduction, longitudinal and radial conduction with heat generation, extended surface and fin optimisation;
c. Transient heat conduction: qualitative behaviour and the influence (Biot number) of boundary conditions and material properties, lumped heat capacity analysis (characteristic length, criterion, time constant of cooling), analytical solution of transient heat conduction by separation of variables for general temporal solution (thermal diffusivity, Fourier number and time constant of diffusion) and specific spatial solution in 1d slab with mixed boundary conditions), extension to cylinder and sphere and approximate forms (Heisler’s charts and one-term solutions);
d. Numerical solutions: finite difference schemes for transient 1d and steady state 2d with implementation in Matlab, problem solving in Ansys.
1.3 Convection
a. Concept of boundary layer and flow over flat plate: similarity (Prandtl number) between hydraulic (part II fluid) and thermal boundary layers, Reynolds’ integration, temperature profile and heat transfer coefficient, boundary layer development over flat plate and Nusselt number correlations;
b. External flows: differences streamlined and bluff bodies, heat transfer by flow across a cylinder and sphere, correlations for various geometries and configurations;
c. Internal flow: fully developed laminar flow in a circular pipe (temperature profile, definition/calculation of bulk average temperature, heat transfer coefficient and pressure drop, Nusselt correlations), non-circular pipes and enhancement of heat transfer by narrow channels, boundary conditions (uniform heat flux or constant temperature on the tube wall), turbulent flow, entry zone;
d. Free convection: driving force and Grashof/Raleigh number, boundary layer of free convection, correlations;
e. Condensation and boiling: laminar condensation film, pool boiling characteristics (convection, nuclear and film boiling).
1.4 Radiation
a. Blackbody radiation: general characteristics (Wien’s displacement law) and Stephan-Boltzmann law;
b. Heat exchange between two bodies at different temperature: thermal equilibrium of a radiation body (radiation, reflection, transmission), solid angles and viewing factor.
Part II Applications
2.1 Heat exchangers
a. Type of heat exchangers and overall heat transfer coefficient;
b. Log-mean temperature differences: concentric tube heat exchange, parallel and counter flows and temperature profiles along the flow, correction factors for other types (multi-pass tube-shell, cross-flow);
c. Effectiveness ε of heat exchangers and the ε-NTU method: maximum possible heat transfer and effectiveness, ε-NTU relation for concentric tube heat exchangers, other types of heat exchangers, comparison of heat exchanger performances;
d. Sizing and rating problems: Independent variable and typical heat exchanger problems, methodology using forward and inverse ε-NTU relations;
2.2 Thermal management of electronic components and equipment:
a. Electronics cooling specifics: Heat transfer at different length scales from chips to system, non-uniform and non-steady heat generation, high heat flux and low temperature excursion;
b. Cooling of micro-chips: conduction and heat dispersion at micro-scales, material properties and chip design/packaging, transient heat load and thermal stress;
c. Heat flux and thermal management strategy for electronic equipment: selection of cooling method (effectiveness, cost and environment), optimal distribution of components/units and routing for forced flow;
d. Management of very high heat flux (>50 W cm–2): liquid cooling, heat pipes.
2.3 Heat transfer in energy systems:
a. Heat recovery and steam generators: Recuperation, boiler efficiency and selection of the pinch-point;
b. Combustors and turbines: Radiation from flames; film and effusion cooling technology for combustor walls and for turbine blades;
c. Cryogenic heat transfer.
Learning and Teaching
Teaching and learning methods
The teaching method is based primarily classroom teaching, which consists of systematic development of theoretical fundamentals and problem solving through examples. Comprehensive lecture notes are provided. Problem sheets and solutions are distributed by stages to aid independent study. Some in-class demonstrations (boiling heat transfer, heat pipes etc) are used. Computer based sessions are used for the numerical modelling content.
Type | Hours |
---|---|
Tutorial | 3 |
Practical classes and workshops | 6 |
Lecture | 36 |
Preparation for scheduled sessions | 36 |
Follow-up work | 36 |
Completion of assessment task | 15 |
Revision | 18 |
Total study time | 150 |
Resources & Reading list
Textbooks
Younes Shabany (2010). Heat Transfer: Thermal Management of Electronics. CRC Press.
Jack P. Holman, Heat Transfer (2009). Heat Transfer. McGraw-Hill Higher Education.
Frank P. Incropera, David P. DeWitt, Theodore L. Bergman, Adrienne S. Lavine (2012). Principles of Heat and Mass Transfer. John Wiley & Sons, International Student Version edition.
Assessment
Summative
This is how we’ll formally assess what you have learned in this module.
Method | Percentage contribution |
---|---|
Coursework | 30% |
Examination | 70% |
Referral
This is how we’ll assess you if you don’t meet the criteria to pass this module.
Method | Percentage contribution |
---|---|
Examination | 100% |
Repeat
An internal repeat is where you take all of your modules again, including any you passed. An external repeat is where you only re-take the modules you failed.
Method | Percentage contribution |
---|---|
Examination | 100% |
Repeat Information
Repeat type: Internal & External